End Cap

Franta End Cap is a stainless steel press fitting designed to seal pipe ends and reserved outlets in piping systems. Available in 304/316L stainless steel and sizes from 15 mm to 108 mm, it suits EN 10312 drinking water, hot and cold water, and building water supply systems.

Material: 304,316L
Standard: EN10312
Fitting Category: Others
Fitting Type: End Cap

Multiple materials available

Complete specifications

Project Engineering Adaptation

Comprehensive product lineup

National Customer Service Hotline

400-886-7797

Online Consultation

Related Products

Weight

Quantity

Inventory

Add to cart

Buy Now

隐藏域元素占位

Product Description
Product Specifications
Manufacturing Process
Quality Inspection
Packaging and Delivery

Product Introduction
Franta End Cap is a stainless steel press fitting designed to terminate pipe ends, close reserved outlets and provide secure closing points in stainless steel piping systems. It can be used for both temporary and permanent pipe-end termination according to project design.
The product is available in 304 and 316L stainless steel, with sizes ranging from 15 mm to 108 mm. It is designed for EN 10312 stainless steel piping systems used in drinking water, hot and cold water, residential, commercial and public building applications.
As part of the Franta stainless steel press fitting system, the End Cap can be matched with stainless steel tubes, couplings, tees, reducers, valves and other compatible fittings for complete piping system supply.
Product Features
1. Pipe-End Termination
Designed to securely close the end of a stainless steel pipeline or reserved outlet in water supply systems.
2. 304 / 316L Stainless Steel
Available in 304 and 316L stainless steel to meet different water quality, environmental and project requirements.
3. Reserved Outlet Application
Suitable for temporarily or permanently closing reserved pipe branches while allowing future system extension according to project design.
4. Press-Fit Connection
Designed for standardized press installation with compatible Franta stainless steel tubes and press fitting systems.
5. O-Ring Sealing Compatibility
Compatible with suitable O-ring sealing components. O-ring selection should follow the transported medium, operating temperature and project requirements.
6. System Compatibility
Can be matched with Franta stainless steel tubes, couplings, reducers, tees, valves and other pipeline accessories for complete system installation.
Application Scenarios
Building Water Supply Systems
Suitable for pipe-end termination in drinking water, cold water and hot water piping systems.
Reserved Pipe Outlets
Used for temporary or permanent closing of reserved outlets during phased construction, renovation or future system extension.
Pump Rooms and Equipment Areas
Applicable to pump rooms, equipment areas and service pipelines where unused or reserved pipe ends require secure closure.
Residential and Commercial Buildings
Suitable for apartments, hotels, offices, shops and other building water supply projects requiring organized pipe-end treatment.
Renovation Projects
Can be used in pipeline renovation and replacement projects where existing or newly reserved pipe ends need to be closed.
Connection and System Compatibility
Franta End Cap should be selected according to the corresponding EN 10312 stainless steel tube size, material grade, O-ring type, connection system and project requirements.
The End Cap can be supplied together with Franta Stainless Steel Tube and compatible press fittings to form a coordinated stainless steel piping solution for residential, commercial and engineering water supply projects.
FAQ
Q1. What is an End Cap used for?
It is used to close pipe ends, reserved outlets or system termination points in stainless steel piping systems.
Q2. Can an End Cap be used for reserved pipe outlets?
Yes. It can be used for temporary or permanent closing of reserved pipe branches according to the project design.
Q3. What materials are available?
304 and 316L stainless steel options are available. Material selection should follow the application environment and project requirements.
Q4. What sizes are available?
Available sizes range from 15 mm to 108 mm according to the latest product specification.
Q5. Can the End Cap be used in drinking water systems?
Yes. It is suitable for drinking water and clean water piping systems when the material, O-ring and installation requirements meet the applicable project specifications.
Q6. What information should be provided for quotation?
Please provide the required size, material, quantity, connection system, application and project requirements.
EN 10312
Size (mm)
15
18
22
28
35
42
54
76.1
88.9
108
Zhejiang Franta Co., Ltd. has established a standardized production and quality management system. According to the structure, material, and application requirements of different products, the company implements comprehensive process control covering raw materials, forming and machining, welding, heat treatment, surface treatment, cleaning, inspection, and packaging to ensure consistent product quality and meet the requirements of building water supply and drainage systems, domestic water supply, and related engineering applications.
Process Flow Reference
Process Description
Franta develops corresponding manufacturing processes and inspection requirements for different product categories, with standardized control over materials, dimensional accuracy, processing quality, surface condition, and finished product performance. For products subject to specific process requirements, processes such as gas-shielded welding, solution heat treatment, pickling and passivation, and ultrasonic cleaning are applied to further improve product stability, corrosion resistance, and surface cleanliness.
Franta has established a quality inspection system covering raw materials, production processes, and finished products. According to the structure and application requirements of different products, the company conducts appropriate inspections of material, dimensions, appearance, key performance, and finished product condition to ensure that products meet relevant product standards and internal quality control requirements before shipment.
Common Quality Control Items
Material Inspection
Inspection and verification of raw material composition and related material properties.
Dimensional Accuracy Inspection
Inspection of key product dimensions, specifications, and processing accuracy.
Surface Quality Inspection
Inspection of surface condition, cleanliness, and overall appearance quality.
Structural and Processing Quality Inspection
Inspection of forming, welding, connections, and other critical structural areas.
Performance Testing
Depending on product requirements, relevant tests may include sealing, pressure resistance, connection performance, and other applicable performance tests.
Finished Product and Pre-Shipment Inspection
After production is completed, products undergo sampling and pre-shipment inspection, including verification of specifications, quantities, identification marks, and finished product condition.
Quality Control Value
Through comprehensive quality control from raw materials to finished product shipment, Franta continuously improves product consistency and stability, providing a reliable product foundation for residential, commercial, public building, municipal water supply, and industrial applications.
Zhejiang Franta Co., Ltd. uses standardized packaging methods according to the specifications, quantity, transportation distance, and project requirements of engineering pipes, helping reduce the risk of wear, impact, and scratches during transportation and ensuring that products are safely delivered to warehouses, project sites, or designated locations.
Common Packaging Methods
Protective Plastic Film Packaging
Woven Bag Packaging
Bundled Packaging
Steel Strap Binding
Pallet Packaging
Wooden Frame or Wooden Crate Packaging
Customized Labels or Project Shipping Marks
Shipping Information
Engineering orders can be arranged for shipment according to the project delivery schedule, specification list, phased delivery requirements, and on-site receiving conditions. For quotation or order placement, it is recommended to provide the project name, application scenario, material, size range, quantity, delivery location, and whether matching fittings, valves, or other accessories are required.

EN 10312
15
18
22
28
35
42
54
76.1
88.9
108

Keywords:

None

Product Center

Frequently Asked Questions

How Can I Request Franta Product Samples, Technical Documents, Product Selection Support, or a Project Quotation?

You can obtain relevant product information through the Franta website, download center, or contact channels. For projects requiring further product selection support or a quotation, please provide details such as the product name, specifications, quantity, application, and basic project information. Based on your actual requirements, Franta’s sales or technical team can provide product documentation, selection recommendations, sample support, and quotation solutions.

Does Franta Support Bulk Project Supply and Complete Stainless Steel Piping System Solutions?

Yes. Franta offers a comprehensive product range that includes stainless steel pipes, press-fit fittings, grooved fittings, flanged fittings, valves, manifolds, O-ring seals, pipe supports, fasteners, and installation tools. Based on project requirements, Franta can provide systematic product selection and coordinated supply of piping system components, helping reduce compatibility issues between different products and streamline the procurement process.

What Information Is Required to Request a Quotation for an Engineering Project?

To improve product selection and quotation efficiency, please provide information such as the project type, conveyed medium, required material grade, pipe size or specification, connection method, quantity, project location, and any special operating conditions. If design drawings, material lists, or technical specifications are available, they can also be provided. Franta can use this information to recommend suitable products and prepare an accurate quotation.

Does Franta Offer OEM and ODM Services for Stainless Steel Water Tanks?

Yes. Franta provides OEM and ODM services for stainless steel water tanks. Based on project and market requirements, we can discuss customization options for tank dimensions, structural design, surface treatment, accessories, and packaging. OEM and ODM solutions are developed according to the specific requirements and conditions of each order.

What Materials and Manufacturing Processes Are Used for Franta Stainless Steel Water Tanks?

Franta stainless steel water tanks are primarily made from high-quality stainless steel materials. Depending on the product design, manufacturing processes may include forming, welding, and surface treatment. Throughout production, quality control is carried out at key stages such as incoming material inspection, forming, welding, and surface finishing to meet different requirements for tank structure, dimensions, and surface appearance.

What Inspections and Tests Are Required After Installing a Stainless Steel Piping System?

After installation, the pipes, fittings, insertion depth, pressed joints, and pipe supports should be inspected to ensure they have been installed correctly. Pressure testing or other leak-tightness tests should then be carried out in accordance with the applicable project specifications. For concealed piping, the system should be fully inspected and accepted before walls or ceilings are closed or subsequent finishing work begins, ensuring that all requirements are met before proceeding to the next stage of construction.

Which Applications Are EPDM, FKM, and HNBR O-Rings Best Suited For?

Different O-ring materials offer different levels of temperature resistance, chemical compatibility, and aging resistance. EPDM is commonly used in water supply and conventional hot water systems, while FKM is better suited to higher-temperature conditions and certain special media. HNBR can be selected for specific industrial media and operating conditions. For each project, the sealing material should be chosen based on the conveyed medium, operating temperature, system pressure, and technical requirements rather than by color alone.

How Are Press-Fit Stainless Steel Pipe Connections Sealed, and Are They Reliable?

Press-fit stainless steel pipe connections rely on the pipe, fitting socket, O-ring seal, and a dedicated press tool working together to create a secure joint. During installation, the pipe is inserted into the fitting to the specified depth, and the fitting socket is then mechanically pressed with the proper tool. This creates a stable connection between the pipe, fitting, and sealing ring. The reliability of the connection depends on both the precision of the piping components and correct installation in accordance with the specified procedures.

What Is the Franta Active Water System, and How Is It Different from a Traditional Home Water Supply System?

The Franta Active Water System uses looped piping design and dynamic circulation components to keep water moving and refreshed within the piping system, helping reduce long-term water stagnation in certain pipe sections. Unlike traditional home water supply systems that primarily focus on delivering water from one point to another, the Active Water System places greater emphasis on continuous water movement, circulation management, and the overall household water-use experience.